Kambrook ARCTIC KFA211 Uživatelský manuál stáhnout pdf (Strana 7)

7

7.

Thread the screw through the small

holes of both the front and back grilles,

and tighten using the nut provided.

Fig. 2

To Operate the Arctic

Desk Fan

Plug the cord into a 230V or 240V power

point and switch on.

NOTE: To avoid an electrical circuit

overload, it is recommended that no

other appliances are plugged into

the same circuit as your fan, when it

is in use.

Use the Controller Switch to select the

desired air ﬂow speed setting.

0 – The fan is in the ‘OFF’ position

1 – Low

2 – Medium

3 – High

Fig. 3

(KFA210 only offers 2 settings)

Setting the Oscillation

The oscillation function works in all air

ﬂow settings.

Press down the Oscillation button to

activate. The fan will begin to oscillate

from side to side.

Lift the Oscillation button to stop the fan

from oscillating.

NOTE: The Oscillation button is

located behind the Rear Grille, on

the Motor head housing.

Adjustable Tilting Head

The Arctic Desk Fan incorporates

an Adjustable Tilt Head for greater

air coverage.

To adjust the angle of the head on the

KFA210, loosen the Control Knob located

beneath the Motor head housing, select

the required tilt angle, then tighten the

Control Knob.

To adjust the angle of the head on the

KFA211 and KFA213, while securely holding

the shaft of the fan body, simply lift or

lower the Motor head housing, the head

will click as it is being adjusted.

Care and Maintenance

Always switch the Arctic Desk Fan off,

prior to cleaning the housing, base, grilles

and blades.

To clean the outside of the fan, wipe the

exterior with a soft, damp cloth. Never use

an abrasive cleaner.

When not in use, store the fan (preferably

in its original box) in a cool, clean and

dry location.

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře